2,Combine with video encoding software LedPlayer, can control various rules, special-shaped and kinds of point, line, surface light source.
3,Computer online, can support up to 300,000 pixels.
4,Each controller has 8 ports, each port can support up to 170/512/768 pixels.
5,Optimize network protocol used between the controller cascaded without external switch
6,Each controller must set the corresponding IP address through the controller's DIP switch, the project is more stable.
7,Enhanced 485 and TTL differential signal output.
8,DMX512 IC can realize computer inline writing address, for specific IC model, welcome to contact our salesman to confirm.
Controller launched diagram:
System architecture figure :
Single one support lights
Why Choose Us
To reduce the risk of electric shock, fire or injury to persons, read and follow the warnings and precautions to prevent the occurrence of such events
1 Non-professionals do not open the enclosure.
2 Do not install this controller in a magnetic and high-pressure environments.
3 In order to reduce the component due to a short circuit caused the fire and the risk of damage, make sure the line is connected securely connected.
4 Make sure that the controller altogether good ventilation and proper temperature environment.
5 controller to the room lighting within a distance of 10 meters, the distance between lamps and lighting fixtures, please contact the manufacturer over the pitch range, you can add a signal amplifier.
6 with a controller, make sure to use AC100-230V power supply and ensure that the same transformer and controller connection polarity.
7 Do not plug the power cable in the open, be sure to turn on the power connection is secure and properly before the power
8 When they do not own any unusual repairs, so not warranty.
9 In order to reduce the risk of electric shock, fire or personal injury, read and follow the warnings and precautions to prevent the occurrence of such events